View All Tie Rods / Ball Joints
This ball joint is most commonly used for (but not limited to) the front A arm on 150cc ATVs. Approximate length of 7.8cm with an 11mm thread. The core cylinder unit is approximately 32 mm in diameter...
This ball joint is most commonly used for (but not limited to) the front A arm on 150cc ATVs. Approximate length of 7.8cm with an 11mm thread. The core cylinder unit is approximately 32 mm in diameter...
On Back Order
Reserve it now. |
This ball joint is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi.
Ball joint has a threaded post diameter ...
This ball joint is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi.
Ball joint has a threaded post diameter ...
Ball Joint - 500-700cc, Hisun, ATV **WITH THREADS** - 70A6256 - PBC3353F1
Tie Rods / Ball Joints
$39.19
Ball joint **WITH THREADS**(Manufacturer lists both a threaded and unthreaded version under the same part number, for the unthreaded version please see our part number 70A6257). Universal joint b, swi...
Ball Joint - 500-700cc, Hisun, ATV, **WITHOUT THREADS - SNAP RING** - 70A6257F1
Tie Rods / Ball Joints
$39.19
Ball joint **WITHOUT THREADS**(Manufacturer lists both a threaded and unthreaded version under the same part number, for the threaded version please see our part number 70A6256). Universal joint b, sw...
Ball joint. Universal joint a, swing arm. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well ...
Ball joint. Most commonly used for (but not limited to) 400cc ATVs such as the Jianshe JS400 Mountain Lion as well as many other clones, rebrands and similar displacement machines.
Common Jianshe ...
Ball Joint - ATV/UTV, Hisun, 400cc, 500cc, 700cc, 800cc - 70A6242 - PBC3313F1
Tie Rods / Ball Joints
$48.99
Ball joint. Commonly used for (but not limited to) 400cc and 800cc engines, such as the Hisun 400cc and Hisun 800cc 4x4 ATVs and Hisun 700cc and 800cc UTVs, as well as many other clones, rebrands and ...
Ball Joint - CFMoto, 500cc, 600cc, 800cc, 1000cc, ATV, UTV - PBC32319FF1
Tie Rods / Ball Joints
$68.59
This Ball Joint (main pin comp.) is most commonly (but not exclusively) used for CFMoto ATVs and UTVs such as CF500US, CF500-3, CF500UU, CF600-3, CF625-3, CF625-6, CF625-3, CF800, CF800UU, CF800US, CF...
This ball joint is most commonly used for (but not limited to) the front A-arms on 50cc to 300cc ATVs, primarily 110cc, 125cc, 150cc and 250cc ATVs. Threaded Post approximately 11mm (approximate maxi...
This ball joint is most commonly used for (but not limited to) the front A-arms on 50cc to 300cc ATVs, primarily 110cc, 125cc, 150cc and 250cc ATVs. Approximate length of 8.2cm with an 12mm thread. T...
This ball joint is most commonly used for (but not limited to) the front A-arms on 50cc to 300cc ATVs, primarily 110cc, 125cc, 150cc and 250cc ATVs. Threaded Post approximately 13mm (approximate maxi...
Ball Joint - Front A-arm, 150cc to 400cc, ATV, Dirt Bike, 300cc, 2x4, 4x4 and 4x4 IRS - 70A6240 - PBC3321F1
Tie Rods / Ball Joints
$53.89
This ball joint stud is typically found in the A-Arm / Front A-Arm / Front Suspension section of several part manuals. Commonly used for but not limited to 300cc, 325cc, 500cc, and 550cc engines. It ...
Ball Joint - Front Rocker Buttonhead, XY500UE, XY600UE, Chironex - 70A6260 - PBC3297F1
Tie Rods / Ball Joints
$58.79
Ball Joint - Front Rocker Buttonhead. This front rocker ball joint set is commonly applicable for many big brand and lesser brand name machines from all over the world. Common format for many UTVs i...
Ball Joint - Lower, CFMoto, 400cc, 500cc, 600cc, 800cc, ATV, UTV - PBC32259FF1
Tie Rods / Ball Joints
$68.59
Lower Ball Joint most commonly (but not exclusively) used for CFMoto ATVS and UTVS such as CF400AU, CF400ATR, CF500(ABCDE), CF500-2(A), CF500AU, CF500ATR, CF600, CF625-2(A), CF625-C(B), CF800ATR, CF80...
Ball Joint - Set (2pcs), XY500UE, XY600UE, Left, Right, XY, Xinyang, Chironex - 70A6250 - PBC3292F1
Tie Rods / Ball Joints
$107.79
Tie rod, rod end. Set of 2pcs (left and right, including 1pc 27230-5000 standard thread and 1pc 27240-5000 reverse thread). This ball joint profile is commonly applicable for many big brand and less...
Ball Joint - Upper, CFMoto, 400cc, 500cc, 600cc, 800cc, ATV, UTV - PBC32199FF1
Tie Rods / Ball Joints
$58.79
Upper Ball Joint most commonly (but not exclusively) used for CFMoto ATVS and UTVS such as CF400AU, CF400ATR, CF500(ABCDE), CF500-2(A), CF500AU, CF500ATR, CF600, CF625-2(A), CF625-C(B), CF800ATR, CF80...
Ball Joint - UTV, Hisun, 400cc, 500cc, 700cc, 800cc - 70A6280 - PBC3298F1
Tie Rods / Ball Joints
$29.39
Ball joint. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well as many other clones, rebrands...
This 2pc ball joint set has a threaded post diameter of approximately 12mm with 6.7cm total length. The core cylinder unit is approximately 32mm in diameter (excluding the lip). This ball joint is mo...
This ball joint has a threaded post diameter of approximately 12mm with 6.9cm total length. The core cylinder unit is approximately 34mm in diameter (excluding the lip). This ball joint is most commo...
Ball Joint - Swing Arm, FR (Lower). Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly ...
Ball Joint - Swing Arm, FR (Upper). Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly ...
Double wall alloy bicycle rim and electric motor wheel assembly, 750W, 48V with 22x1.75 tire. Most commonly (though not exclusively) used for 750W, 48V electric bicycles (ebikes).
...
Dust Covers - Ball Joint, 150cc to 400cc, ATV, 300cc, 2x4, 4x4 and 4x4 IRS - 70A6101 - PBC3367F1
Tie Rods / Ball Joints
$5.87
Dust cover / ball joint cover for (but not limited to) 300cc to 400cc ATVs, dirt bikes, scooters, buggies and other powersports products. Manufacturer part number 4.2.01.1030. Applies primarily to (bu...
This ball joint rubber boot set is most commonly used for (but not limited to) the front A arm on 50cc to 500cc ATVs. ...
Rod End - Heim Joint, Spherical Bearing, 1/2 Inch - 70A6400 - PBC3341F1
Tie Rods / Ball Joints
$34.29
1/2" - 14mm male thread rod end, rod end has 1/2" hole (13.9mm). Low carbon steel housing. Ball is heat treated, precision ground and hard chrome plated. The body has a protective coating for corrosi...
Rod End - Heim Joint, Spherical Bearing, 10mm (3/8 Inch), LH Thread - PBC32429FF1
Tie Rods / Ball Joints
$34.29
3/8"-10mm female rod end. Left hand thread. Rod end has 3/8" hole (9.9mm). Low carbon steel housing. Ball is heat treated, precision ground and hard chrome plated. The body has a protective coating f...
Rod End - Heim Joint, Spherical Bearing, 10mm (3/8 Inch), RH Thread - 70A6450 - PBC3336F1
Tie Rods / Ball Joints
$34.29
3/8"-10mm female rod end. Right hand thread. Rod end has 3/8" hole (9.9mm). Low carbon steel housing. Ball is heat treated, precision ground and hard chrome plated. The body has a protective coating ...
Rod End - Heim Joint, Spherical Bearing, M14, XY500UE, XY600UE, Chironex, CF Moto - 70A6455 - PBC3366F1
Tie Rods / Ball Joints
$48.99
Rod End - Heim Joint, Spherical Bearing, M14, XY500UE, XY600UE, UTV. This rod end (aka Heim joint) is most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs (4x4/2x4 and sim...
Rod End - Heim Joint, Spherical Bearing, M18, XY1100, Chironex 1000cc, 1100cc - 70A6495 - PBC3362F1
Tie Rods / Ball Joints
$68.59
Rod End - Heim Joint, Spherical Bearing, M14. Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. ...
Steering Tension Rod - 250cc, ATV, Jianshe, Baja - 90A3596 - PBC3314F1
Tie Rods / Ball Joints
$88.19
Steering tension rod - ballpin assembly (Tie Rod). Set of 2pcs. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the worl...
On Back Order
Reserve it now. |
Tie Rod - 150cc to 800cc, ATV, Dirt Bike, 300cc / 550cc, 2x4, 4x4 and 4x4 IRS - 30A3430 - PBC3368F1
Tie Rods / Ball Joints
$78.39
Tie Rod. Most commonly used for (but not limited to) 300cc and 550cc liquid cooled ATV's, UTVs, dune buggies, go karts and other similar products. Manufacturer part number 3.1.01.1000. Popularly app...
This tie rod is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi.
Common Liangzi model names consist of varia...
Tie rod. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other c...
Tie rod. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines.
These machines are commonl...
Tie rod. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines.
...
On Back Order
Reserve it now. |
Tie rod. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines.
These machines are commonl...
Tie Rod - Balance Lever, 400cc, 500cc, 700cc, 800cc Hisun - 90A3680 - PBC3293F1
Tie Rods / Ball Joints
$44.09
Tie rod / Balance lever. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well as many other clo...
Tie Rod (LEFT SIDE) - Anti-roll bar, ODES, 400CC, LZ400 - 70A6201 - PBC3324F1
Tie Rods / Ball Joints
$63.69
This anti-roll bar tie rod (left side) is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi.
Common Liangzi mo...
Tie Rod (RIGHT SIDE) - Anti-roll bar, ODES, 400CC, LZ400 - 70A6200 - PBC3319F1
Tie Rods / Ball Joints
$63.69
This anti-roll bar tie rod (right side) is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi.
Common Liangzi m...
This tie rod end is typically found in the A-Arm / Front Suspension / Steering Column section of several part manuals. Commonly used for but not limited to 260cc, 300cc, 325cc, 330cc, 400cc, 500cc, a...
On Back Order
Reserve it now. |
Steering tie rod end. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines.
These machine...
Steering tie rod end. Commonly used for (but not limited to) 500cc, 700cc and 800cc engines, such as the Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and s...
Steering tie rod end. Commonly used for (but not limited to) 500cc, 700cc and 800cc engines, such as the Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and s...
Tie Rod End - CFMoto, 500cc, 600cc, 800cc, 1000cc, ATV, UTV, M10/M12 Thread Housing - PBC32379FF1
Tie Rods / Ball Joints
$44.09
This tie rod end (steering knuckle) with M10/M12 thread housing is most commonly (but not exclusively) used for CFMoto ATVs and UTVs such as CF500US, CF500UU, CF625-3, CF800, CF800-3, CF800US-A, CF800...
Tie Rod End - M12x1.25 Ball Joint Stud, M14 Threaded Housing, Chironex, 1000cc, 1100cc - 70A6394 - PBC3363F1
Tie Rods / Ball Joints
$117.59
Left side . Right side tie rod end (ball joint stud), M12x1.25 ball stud, M14 threaded housing, commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands...
Tie Rod End - M12x1.25 Ball Stud, M12 Threaded Housing - 70A6311 - PBC3332F1
Tie Rods / Ball Joints
$34.29
These tie rods ends are made from hardened and corrosion resistant steel. The ball stud has a thread length of 20mm with M12x1.25 nut. The housing has a thread length of 40mm with a M12 nut. Standard ...
Tie Rod End - M12x1.25 Ball Stud, M12 Threaded Housing, Reverse Thread - 70A6300 - PBC3346F1
Tie Rods / Ball Joints
$34.29
These tie rods ends are made from hardened and corrosion resistant steel. The ball stud has a thread length of 29mm with M12x1.25 nut. The housing has a reverse thread length of 40mm with a M12 nut. ...
Tie Rod End - M12x1.25 Ball Stud, M12 Threaded Housing, UTV, Odes, 800cc - 70A6380 - PBC3342F1
Tie Rods / Ball Joints
$44.09
This steering tie rod end is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs.
Common Odes model names consist of variations of "...
Tie Rod End - M12x1.25 Ball Stud, M14 Threaded Housing, Chironex, 1000cc, 1100cc, Right Side - 70A6395 - PBC3347F1
Tie Rods / Ball Joints
$117.59
Right side tie rod end, M12x1.25 Ball Stud, M14 Threaded Housing. Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs,...
Tie Rod End - M12x1.25 Ball Stud, M16 Threaded Housing - 70A6320 - PBC3356F1
Tie Rods / Ball Joints
$34.29
These tie rods ends are made from hardened and corrosion resistant steel. The ball stud has a thread length of 18mm with M12x1.25 nut. The housing has a thread length of 74mm with a M16 nut. ...
Tie Rod End - M12x1.25 Ball Stud, M16/M14 Threaded Housing - 70A6315 - PBC3351F1
Tie Rods / Ball Joints
$34.29
These tie rods ends are made from hardened and corrosion resistant steel. The ball stud has a thread length of 29mm with M12x1.25 nut. The housing has a total thread length of 65mm with a M16 inner nu...
Tie Rod End - M14x1.5 Ball Stud, M16 Threaded Housing - 70A6325 - PBC3361F1
Tie Rods / Ball Joints
$34.29
These tie rods ends are made from hardened and corrosion resistant steel. The ball stud has a thread length of 21mm with M14x1.25 nut. The housing has a thread length of 71.6mm with a M16 nut. ...
This is a 100mm tie rod set with a 10mm bolt diameter. 100mm refers to the length of the central hexagonal adjustment bar. These tie rods are made from hardened and corrosion resistant steel. Tie rod...
This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 100mm in length. 100mm refers to the length of the central hexagonal adjustment bar. These tie rods are made ...
This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 110mm in length. 110mm refers to the length of the central hexagonal adjustment bar. These tie rods are made ...
This is a 115mm tie rod set with a 10mm bolt diameter. 115mm refers to the length of the central hexagonal adjustment bar. These tie rods are made from hardened and corrosion resistant steel. Tie rod ...
This is a 115mm tie rod set with a 10mm bolt diameter. 115mm refers to the length of the central hexagonal adjustment bar. These tie rods are made from hardened and corrosion resistant steel. Tie rod...
This is a 120mm tie rod set with a 10mm bolt diameter. 120mm refers to the length of the central hexagonal adjustment bar. These tie rods are made from hardened and corrosion resistant steel. Tie rod...
This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 150mm in length. 150mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro...
This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 170mm in length. 170mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro...
This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 180mm in length (referring to the length of the central hexagonal adjustment bar). These tie rods are made from ...
This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 190mm in length. 190mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro...
This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 200mm in length. 200mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro...
This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 210mm in length. 210mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro...
This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 230mm in length. 230mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro...
This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 240mm in length. 240mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro...
This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 250mm in length. 250mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro...
This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 260mm in length. 260mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro...
This tie rod set is commonly used for (but not limited to) 50cc to 250cc 4 stroke ATVs. 270mm in length. 270mm refers to the length of the central hexagonal adjustment bar. These tie rods are made fro...
